| Customization: | Available |
|---|---|
| Customized: | Customized |
| Certification: | ISO9001 |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
Remote Temperature Controller TRV Head With Spiral Immersion Sensor TF-36 has a thin capillary tube running away from it to a position away from the Radiator with a temperature sensing bulb at the end, which is usually clipped into a small plastic bracket/box with a lid and then clipped onto the front with small gaps allowing for air temperature sensing.
These sensing bulbs can fail after a while or get damaged, as can the capillary tube making the TRV completely ineffective.
As the Radiator is boxed in, a typical TRV / TRV head would be no good. So You will need to find a compatible TRV with a remote sensor - fit the Head and run the sensor tube, etc., to a suitable position away from the Radiator.
Ideally, renew the Remote Sensing TRV, including the Valve, plus run the sensor tube, etc., as you know that it has been fitted for a long time, and the pin will almost certainly not be as accessible as it once was.
Features
Materials
Technical Specifications
| Model | TF-36 |
| Temperature range | 20~70 ºC |
| Maximum static pressure | 1.0 MPa |
| Maximum differential pressure | 0.1 MPa |
| Maximum temperature resistance | 80 ºC |
| Installation size | M30x1.5 |
| Brass nut size | G1/2" |
| Hysteresis | 0.4 K |
| Thermal bulb | Φ15.3x95mm |
| Capillary length | 1000mm |
){kind=link}