| Customization: | Available |
|---|---|
| Certification: | ISO, CE |
| Power Supply: | AC220V |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model number | ZBA230DM |
| Function | Rs485 communication mode |
| Power supply | 230V AC, 24V AC/DC |
| Power consumption | 5W for running, 1W for maintaining |
| Frequency | 50/60Hz |
| Stroke | 90°C/90s |
| Torque | 10Nm |
| Installation size | M33X1.5 |
| Protection level | IP54 |
| Cable | 4x0.3 black PVC 0.5m |
| Sensor length | ø3.5x1m |
Type of valves to be used
| Installation type | Model number | Thread | Flow coefficient Kvs | Body pressure MPa | Turn off differential pressure MPa | Medium temperature |
| Nut | VB30F20A | 3/4" | 7.3 | 2.5 | 0.5 | 5-100°C |
| Nut | VB30F25A | 1" | 8.7 | 2.5 | 0.5 | 5-100°C |
| Nut | VB30F32A | 1 1/4" | 11.4 | 2.5 | 0.5 | 5-100°C |
| Nut | VB30F40A | 1 1/2" | 14.2 | 2.5 | 0.5 | 5-100°C |
| Nut | VB30F50A | 2" | 18.2 | 2.5 | 0.5 | 5-100°C |
Installation Guide
Before carrying out maintenance work, the actuator must be disconnected from the power supply (unplug the power cord). At the same time, the water pump and isolation device in the particular part of the relevant pipeline should also be closed (if necessary), it should be cooled first to reduce the system pressure). When the lines are refilled, the system will ony work again if the valves and actuators are properly installed and connected.
){kind=link}